Adjustable from 18mm to 36mm - designed for low threshold height projects

The Low-Profile 1836 pedestal is a specially designed support for use in areas where low threshold heights are encountered. Each support is composed of a threaded head section with 4 removable tabs (2 mm or 4mm in width) for paver or tile spacing. The spacer tabs are individually removable to enable the supports to be used in areas where no separation is required, such as under the centres of large slabs, or on sides. (Please note: the 2mm spacer tabs are fragile and this version is only available to special order and must be shipped on a pallet to prevent damage in transit).

An easy to operate threaded adjustment ring makes raising or lowering the head really quick and precise. Height adjustments can be made without removing the paver or tile thus allowing for extremely easy and fast installation. As standard, each Low-Level 1836 pedestal comes complete with one 9mm extender ring (this can be fitted by lifting the head out of the base, inserting the ring and replacing the head).

The large 200mm (8”) base plate provides stable support on most surfaces. Scribe marks are provided on the underside to assist in trimming for use at sides and corners of installations. An optional 3mm thick anti-slip, cushioning, rubber base ring is available for use on membranes, etc. This effectively reduces transmitted noise where decks are mounted on balconies or roof areas, as well as for floors in multi-occupancy buildings.

We recommend the use of our optional acoustic cushioning rings for the support head area for tile and paver installations. These help to bed tile corners securely, prevent any rattling, and reduce transmitted noise through the support system.

StrataRise pedestals are robust and can withstand high loads of at least 1760 lbs (800Kg) at maximum height extension (i.e. with one thread engaged).

StrataRise Pedestals ... the professional's choice!

Product details